Element of Automation Bm2301, Mechanical Arm Rotation Information Feedback

• Type: Element of Automation
• Resolution Ratio: 64~65535(6~16bit)
• Angular Linear Error: ±0.3°
• Angular Repetition Error: ±0.05°
• Outer Diameter: Standard Model: 38mm/ Mini Model: 15mm
• Shaft Diameter: Standard Models: 6 and 8mm/ Mini Models: 3mm
• Model NO.: BM2301
• Shaft Length: Standard Version: 15mm
• Class of Protection: IP54, IP67
• Transport Package: Box
• Trademark: ZMDAI
• Origin: Guangdong

Product Description

An encoder is a sensor device that measures the position of rotating or linear motion and converts this position information into a digital signal that can be read and recognized by a computer or controller. The encoder and the motor are linked to read the position information fed back by the encoder to form an accurate and reliable closed-loop control system.

Product Description

Machine parameter
Equipment model	BM2301
Position detection technique	Magnetoelectric encoder
Magnetic encoder class	TMR fourth generation magnetoelectric induction technology, tunnel magnetoresistance effect
Encoder type	Absolute encoder/Incremental encoder
Resolution ratio	64~65535(6~16bit)
Angular linear error	±0.3°
Angular repetition error	±0.05°
Count the number of laps	Single-turn absolute encoder: 1 revolution Multi-turn absolute encoder: 10~1770 revolutions
Rotational speed	Incremental encoders and single-turn encoders: 15000PRM multi-turn encoder: 3000PRM
Mechanical/Electrical Parameters
Outer diameter	Standard model: 38mm/ Mini model: 15mm
Shaft diameter	Standard models: 6 and 8mm/ Mini models: 3mm
Shaft length	Standard version: 15mm (including recessed blind hole version)
Axial load	The pull or thrust exerted on the shaft, exceeding which may damage the equipment
Radial shaft load	Vertical pressure on the shaft, exceeding this force may damage the equipment
Axial movement allowed	The maximum range of movement allowed by the rotating shaft
Class of protection	IP54,IP67
Data interface	Absolute encoder: RS232 (MODBUS RTU protocol), RS485 (MODBUS RTU protocol), TTL UART (MODBUS RTU protocol), SPIIncremental encoder: ABZ signal, SDI signal, analog voltage
Environmental parameter
Operating temperature		-40~+105°C

Photoelectric encoder/magnetoelectric encoder comparison
Principles	Photoelectric encoder	Magnetic encoder
Position detection technique	Use light to detect location	Use magnetic fields and sensors to detect position
Precision	High precision, greatly affected by the environment	High precision, greatly affected by magnetic field
Tolerance	Sensitive to dust and pollutants	It is relatively insensitive to dust and pollutants
Cost	Low precision is cheap/High precision is expensive	Low precision cost is higher/high precision cost is lower
resolution ratio	Higher resolution	The resolution depends on the magnetic marking density
Durability	Usually not very durable	Generally durable
Environmental impact	Affected by light and ambient light	Affected by external magnetic field interference

Comparison of four kinds of magnetic encoder TMR magnetic technology chips
Trait	Hall encoder	AMR encoder	GMR encoder	TMR encoder
Power consumption(mA)	5-20	1-10	1-10	0.001-0.01
Size (mm)	1*1	1*1	2*2	0.5*0.5
Sensitivity (MV/V/Oe)	0.05	1	3	20
Work scope(Oe)	1-1000	0.001-10	0.1-30	0.001-200
Resolution ratio (mOe)	500	0.1	2	0.1
Temperature characteristic (ºC)	<150	<150	<150	<200
Response time (ns)	>1000	10	10	0.1
Temperature drift (PPM/K)	3000	3000	3000	400

Comparison of four magnetoelectric encoders
Trait	Hall encoder	AMR encoder	GMR encoder	TMR encoder
Working principle	Hall effect is used to detect magnetic field	Position is detected by magnetoresistive changes	Magnetic field detection using metal multilayer structure	Location detection based on magnetic tunnel structure
Precision	Lower precision	Lower precision	Relatively high precision	High precision
Sensitivity	Generally low	Generally low	Higher	High
Magnetic field response	Good response to magnetic field changes	Good response to large magnetic field changes	Good response to large magnetic field changes	Good response to small magnetic field changes
Anti-interference property	Sensitive to temperature, humidity and electromagnetic interference	May be affected by magnetic field noise and interference	Sensitive to certain magnetic field noise and interference	Relatively good
Temperature stability	Sensitive to temperature change	The performance is better in the normal temperature range	The performance is better in the normal temperature range	It has good stability at different temperatures
Power dissipation	Usually lower	Usually lower	Slightly higher	Usually lower
Cost	Usually lower	Relatively low	Relatively low	Generally high
Apply	Widely used in the field of measurement and control	It is used in low cost and low precision fields	Used in sensor and magnetic storage fields	Where high accuracy and stability are required

Company Profile

Dongguan Hongshan Automatic Identification Technology Co., LTD. (AITGM), founded in 2005, is a national high-tech enterprise specializing in barcode automatic identification technology products and service application solutions in South China. To nearly 3,000 customers (end users and distributors) to provide bar code label printing, bar code collection, scanning and warehouse management asset management, printing industry printing anti-weight, bar code manufacturing execution, bar code automation equipment, ERP system integration and other bar code comprehensive solutions.
 

Certifications

Why Choose Us

1. Our manufacturer have more than 20 years experience, our R & D team are all have 15-20 years professional work experience in this industry.
2. Our company is a national high-tech enterprise in China.
3. Our company has multiple patents.
4. Our products can meet the requirements of customers' packaging production line perfectly.
5. We can provide customized software services according to your needs or requirements.
6. We have a professional foreign trade team and logistics cooperation unit .
7.Products are sold all over the world, well received by customers.
8. Each product will undergo 30 quality tests before leaving the factory, to ensure the to ensure the quality. we only provide the high-quality product.

FAQ

Q:Are you a factory or foreign trade company?
A: We are a manufacturer, located in Guangdong.

Q: Samples are available for customers testify?
A: Please no doubt with that, of course samples will offerable for every of our clients.

Q: What's your leading time regarding mass production?
A: Generally for 15 workding days, please don't worry, we'll always show you the accurate time.

Q: If do mass production, will make the quality same as the sampling confirmation?
A: Definitely. Quality is the first thing we have to gurantee for our customers, always will go through for a strict line of inspectation to ensure all goods are in good condition.

Q: What about the inferior quality products?
A: Please be sure that we'll do our best to make up the poor quality products if caused by us, but if made by force majeure or shipping in tansit, we still will strive for the biggest benefits for you.

Q: About the prodcuts consulting, can we contact you anytime?
A: On line talking, E-mail, skype all ok, will always be at your services, please leave me a message, if i could not reply you at sight.